LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Bolt & Nut For Engine Mount Strut At Right Engine Mount Strut Bracket
    GM105887Courtesy of GENERAL MOTORS CORP.
  1. Remove the right engine mount strut from the right engine mount strut bracket. Refer to Engine Mount Strut Replacement - Right .
    2. Fig 2: Identifying Engine Mount Strut Bracket Bolt
    GM190592Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine oil cooler coolant line bracket bolt, if equipped.
  3. Remove the engine wiring harness bracket bolt.
  4. Remove the drive belt. Refer to Drive Belt Replacement .
    5. Fig 3: Locating Air Conditioning Compressor Mounting Bolts
    GM277918Courtesy of GENERAL MOTORS CORP.
  5. Remove the air conditioning compressor mounting bolts.
  6. Remove and set the air conditioning compressor aside.
    7. Fig 4: View Of Lower Engine Mount Strut Bracket Bolt
    GM155767Courtesy of GENERAL MOTORS CORP.
  7. Remove the vertical engine mount strut bracket bolt from the right engine mount strut bracket.
  8. Remove the lower engine mount strut bracket bolt from the right engine mount strut bracket.
  9. Remove the right engine mount strut bracket.
scientia non olet · About LEMON Manuals