LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Mount Strut Bracket Bolts
    GM61845Courtesy of GENERAL MOTORS CORP.
  1. Install the left engine mount strut bracket.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the engine mount strut bracket bolts through the engine mount strut bracket to the cylinder head.

    Tighten:  Tighten the engine mount strut bracket bolts to 70 N.m (52 lb ft).

  3. Install the thermostat housing. Refer to Water Outlet and Thermostat Installation .
    4. Fig 2: Locating Bolt & Nut For Engine Mount Strut At Left Engine Mount Strut Bracket
    GM105883Courtesy of GENERAL MOTORS CORP.
  4. Install the left engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left .
scientia non olet · About LEMON Manuals