LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rotating Drive Belt Tensioner
    GM368807Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt to all of the pulleys except the generator pulley.
  2. Rotate the drive belt tensioner counterclockwise to release the spring tension.
    3. Fig 2: Drive Belt Routing
    GM368806Courtesy of GENERAL MOTORS CORP.
  3. Install the drive belt. over the generator pulley.
  4. Ensure that the drive belt is properly routed.
scientia non olet · About LEMON Manuals