Water Pump Installation
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the water pump gasket.
- Install the water pump.
- Install the water pump bolts.
Tighten: Tighten the water pump bolts to 10 N.m (89 lb in).
- Install the water pump pulley.
- Install the water pump pulley bolts.
Tighten: Tighten the water pump pulley bolts to 25 N.m (18 lb ft).
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.