LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Removal - Upper

Intake Manifold Removal - Upper

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper Intake Manifold And Components
    GM909590Courtesy of GENERAL MOTORS CORP.
  1. Remove the connector from manifold absolute pressure (MAP) sensor.
  2. Remove the exhaust gas recirculation (EGR) bolts.
  3. Remove the EGR.
  4. Remove the upper intake manifold bolts or studs.
  5. Remove the upper intake manifold and gaskets.
scientia non olet · About LEMON Manuals