LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Mount Strut and Engine Lift Bracket Installation

Engine Mount Strut and Engine Lift Bracket Installation

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Mount Strut & Lift Bracket
    GM192658Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount strut and lift bracket.
  2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the engine mount strut and lift bracket bolts.

    Tighten:  Tighten the engine mount strut and lift bracket bolts to 70 N.m (52 lb ft).