Engine Lift Bracket and Generator Bracket Installation

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Install the front engine lift hook.
Install the generator bracket assembly.

Fig 1: View Of Generator Bracket Assembly Bolts (230, 231, 232)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the generator bracket assembly bolts (230, 231, 232).
Tighten: Tighten the generator bracket assembly bolts to 50 N.m (37 lb ft).