LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Crankshaft Front Oil Seal
    GM187026Courtesy of GENERAL MOTORS CORP.
  1. Align the J 35468  and the crankshaft front oil seal with the engine front cover and crankshaft. See Special Tools .
  2. Install the crankshaft front oil seal using the J 35468  and a suitable tool. See Special Tools .
scientia non olet · About LEMON Manuals