LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Stationary Window System) >> Repair Instructions >> Weatherstrip Replacement - Swing Out Window >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Swing Out Window Weatherstrip
    GM1480113Courtesy of GENERAL MOTORS CORP.
  1. Remove the body side quarter window. Refer to Quarter Window Replacement (With A20 Power)  or Quarter Window Replacement (Without A20 Manual) .
  2. Starting at the weatherstrip joint (2), remove the weatherstrip (1) from the body pinchweld flange.
  3. Clean the pinchweld flange with a 50/50 mixture by volume of isopropyl alcohol and water.
scientia non olet · About LEMON Manuals