Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Locate the rearview mirror support on the windshield.
- Install the rearview mirror to the rearview mirror support, ensuring that the mirror is fully seated.
- Install the screw at the rearview mirror support.
Tighten: Tighten the screws to 2 N.m (18 lb in).
NOTE:
Refer to Fastener Notice
.