LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Stationary Window System) >> Repair Instructions >> Quarter Window Replacement (Without A20 Manual) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Quarter Window Components
    GM1232910Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Before removing a bodyside window, apply a layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.
  1. Open the bodyside window to the full open position.
  2. Use J 34946  or equivalent in order to remove the latch hinge pin. See Special Tools .

    Remove the bodyside window latch hinge pin (4) from the latch (3).

  3. Remove the bodyside window hinge nuts (2) from the body.
  4. Remove the bodyside window from the opening.
  5. Remove the bodyside window latch hinge screw from the window.
  6. Remove the retainers.
  7. Remove the bushings.
scientia non olet · About LEMON Manuals