Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Open and support the hood.
- Disconnect the washer hose from the front washer pump hose (5).
- Remove the wiper arm nut cover (3).
- Remove the wiper arm nut (4).
- Using the J 39637 , remove the wiper arm from the wiper drive system module. See Special Tools .
- Remove the wiper blade from the wiper arm connection.