Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure the wiper is placed in the park position.
- Disengage the finish cover (3) from the wiper arm (5).
- Remove the wiper arm pivot nut (4).
- Using the J 39822 , remove the rear wiper arm. See Special Tools .
- Remove the rear wiper blade from the rear wiper arm. Refer to Wiper Arm Blade Replacement - Rear .