Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the washer solvent from the washer solvent container.
- Disconnect the front washer pump electrical connector.
- Disconnect the front washer pump hose.
- Using a small flat-bladed tool, remove the front washer pump (3) from the washer solvent container.
- Using a small flat-bladed tool, remove the seal from the washer solvent container.