Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Position the seal to the washer solvent container pressing in until fully seated.
- Position the front washer pump (3) to the washer solvent container pressing in until fully seated.
- Connect the front washer pump hose.
- Connect the front washer pump electrical connector.
- Fill the washer solvent container with washer solvent.
- Inspect for leaks.