Removal procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch to the ACCY position.
Set the wiper switch to the Delay position.
Turn the ignition switch off when the wipers are in the innerwipe position.
Using a small flat-bladed tool, remove the lower washer nozzle from the wiper arm.

Fig 1: View Of Upper Washer Nozzle

Courtesy of GENERAL MOTORS CORP.

Using a small flat-bladed tool, remove the upper washer nozzle from the wiper arm.
Disconnect the upper washer nozzle from the upper washer nozzle hose.

Fig 2: View Of Upper Washer Nozzle Hose

Courtesy of GENERAL MOTORS CORP.

Remove the upper washer nozzle hose from the wiper arm.
Disconnect the washer nozzle from the washer hose.
Remove the washer nozzle hose from the wiper arm.