Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Recovery Reservoir Hose

Courtesy of GENERAL MOTORS CORP.

Reposition the coolant overflow hose clamp at the coolant recovery reservoir.
Remove the hose (1) from the reservoir.

Fig 2: Removing/Installing Coolant Recovery Reservoir

Courtesy of GENERAL MOTORS CORP.

Remove the coolant recovery reservoir retainer (1).
Remove the coolant reservoir (2).