Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Coolant Recovery Reservoir

Courtesy of GENERAL MOTORS CORP.

Install the coolant reservoir (2).
Install the coolant recovery reservoir retainer (1).

Fig 2: Identifying Recovery Reservoir Hose

Courtesy of GENERAL MOTORS CORP.

Install the hose (1) to the reservoir.
Position the coolant overflow hose clamp at the coolant recovery reservoir.
Fill the coolant recovery reservoir, if necessary. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (Vac-N-Fill) .