LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Bumper System) >> Repair Instructions >> Impact Bar Replacement - Front Bumper (Pontiac) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Buick) , Fascia Replacement - Front Bumper (Chevrolet)  or Fascia Replacement - Front Bumper (Pontiac) .
    2. Fig 1: Removing/Installing Front Impact Bar At Frame Rail (Pontiac)
    GM1479970Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: When removing the left front impact bar bolts, secure the horn bracket until the repair is completed.
  2. Remove the front impact bar bolts (3) from the rail (2).
  3. Remove the front impact bar (1) from the frame rail.
scientia non olet · About LEMON Manuals