LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Front (Buick) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Energy Absorber Components (Buick)
    GM1545456Courtesy of GENERAL MOTORS CORP.
  1. Remove the front bumper fascia (2). Refer to Fascia Replacement - Front Bumper (Buick) , Fascia Replacement - Front Bumper (Chevrolet)  or Fascia Replacement - Front Bumper (Pontiac) .
  2. Remover the screws (4) securing the energy absorber to the lower fascia.
  3. Remove the energy absorber from the lower fascia.
scientia non olet · About LEMON Manuals