LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the liftgate pull strap. Refer to Pullstrap Replacement - Liftgate .
  3. Using the J 38778  release the liftgate trim panel retainers.
  4. Fig 1: View Of Trim Panel For Lift Gate
    GM313624Courtesy of GENERAL MOTORS CORP.
  5. Remove the trim panel from the liftgate.