Disassembly Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove EVAP canister. Refer to Evaporative Emission Canister Replacement (Short Wheel Base) .
- Disconnect the fuel feed pipe quick-connect fitting . Refer to Plastic Collar Quick Connect Fitting Service .
- Remove the fuel tank module (4). Refer to Fuel Tank Module Replacement (Short Wheel Base) .
- Remove the EVAP canister vent solenoid (2).
- Remove the EVAP pipe assembly.
- Remove fuel tank module (3). Refer to Fuel Tank Module Replacement (Short Wheel Base) .