Disassembly Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the EVAP canister (2). Refer to Evaporative Emission Canister Replacement - Long Wheel Base .
- Remove the EVAP canister vent valve (3). Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement Long Wheel Base .
- Remove the fuel tank module (4). Refer to Fuel Tank Module Replacement (Long Wheel Base) .
- Remove the fuel feed pipe (1) from the fuel tank pipe clips.
- Remove the EVAP purge pipe (6) from the fuel tank pipe clip.