Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel tank. Refer to Fuel Tank Replacement (Short Wheel Base) .
- Disconnect the fuel tank harness electrical connector (4) from the evaporative emission (EVAP) canister vent solenoid valve.
- Disconnect the EVAP vent hose from the vent solenoid valve (2).
- Release the lock tab on the vent solenoid valve bracket and remove the vent solenoid valve.