LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Engine Controls - 3.9L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Canister Vent Solenoid Valve Replacement Long Wheel Base >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Fuel Tank And EVAP Components
    GM1544795Courtesy of GENERAL MOTORS CORP.
  1. Remove tank. Refer to Fuel Tank Replacement (Long Wheel Base) .
  2. Disconnect the fuel tank harness electrical connector (5) from the evaporative emission (EVAP) canister vent solenoid valve (3).
  3. Disconnect the EVAP vent hose from the vent solenoid valve.
  4. Release the lock tab on the vent solenoid valve bracket and remove the vent solenoid valve.