Fuel Sender Assembly

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Sender Assembly

Courtesy of GENERAL MOTORS CORP.

The fuel sender assembly consists of the following major components:

The fuel tank pressure sensor (1)
NOT USED (2)
The fuel feed pipe (3)
The fill limit vent valve (4)
The vapor recirculation line (5)
The fuel level sensor (6)
The fuel pressure regulator (7)