Conditions for Setting the DTC
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- The PPS detects the voltage at the PPS sensor signal is less than 0.05 volts or greater than 4.5 volts for 500 milliseconds.
- The PPS detects the voltage at the PPS sensor 5-volt reference is less than 4.5 volts or greater than 9.1 volts for 500 milliseconds.
- The PPS detects the amperage at the PPS sensor low reference is 25 ma or greater for 500 milliseconds.