Circuit Description
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
The inflatable restraints passenger presence system (PPS) module has an ignition 1 voltage input. The PPS continually monitors itself for faults. If the voltage on this circuit falls below a certain threshold, the PPS will set DTC 024. When the PPS detects this DTC within the PPS it will notify the customer of the enable/disable status by turning ON the OFF indicator on the PASSENGER AIR BAG ON/OFF indicators. Then the PPS will communicate to the sensing and diagnostic module (SDM) through a non-class 2 communications circuit that a PPS fault is present. The SDM will then turn the AIR BAG indicator ON and set DTC B0092 or B0098 indicating a problem within the PPS and will suppress the deployment of the instrument panel (I/P) module.