Action Taken When the DTC Sets

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

The PPS will set a DTC 024, then communicate with the SDM via non-class 2 circuit.
The SDM will set DTC B0092 or B0098.
The SDM disables the I/P module deployment loop.
The PPS will turn ON the passenger air bag status OFF indicator.
The SDM commands the AIR BAG indicator ON via class 2 serial data.