LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Interior Trim) >> Repair Instructions >> Headlining Trim Finish Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Headlining Trim Finish Molding
    GM343963Courtesy of GENERAL MOTORS CORP.
  1. Pull down on the rear headliner trim finish molding in order to disengage the retaining tabs and clips from the retainer.
  2. Remove the rear headliner trim finish molding from the retainer in the roof.