LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Sliding Door >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sliding Door Garnish Molding
    GM319947Courtesy of GENERAL MOTORS CORP.
  1. Align the sliding door garnish molding clips to the holes in the sliding door.
  2. Install the sliding door garnish molding to the sliding door.
  3. Firmly press the sliding door garnish molding in order to secure the clips to the holes in the door.
scientia non olet · About LEMON Manuals