LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Push-In Fasteners
    GM1527599Courtesy of GENERAL MOTORS CORP.
  1. Position the sill plate within the vehicle.
  2. Push downward in order to engage the retaining clips.
  3. Install the push-in fasteners.
  4. Install the rear storage compartment, if equipped. Refer to Storage Compartment Replacement - Rear .
  5. Close the liftgate.
scientia non olet · About LEMON Manuals