LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 .
  2. Remove the instrument panel (I/P). Refer to Instrument Panel (I/P) Assembly Replacement .
  3. Disconnect the wiring harness connectors under the I/P.
  4. Disconnect the wiring harness connectors under the hood.
    5. Fig 1: View Of Instrument Panel Harness
    GM318305Courtesy of GENERAL MOTORS CORP.
  5. Pull on the wiring harness (2) in order to release the retainers.
  6. Remove the wiring harness (2).
scientia non olet · About LEMON Manuals