Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
The radiator support flange mounts the ambient outside air temperature sensor near the radiator baffle. A 2-wire weather pack electrical connector attaches the ambient outside air temperature sensor to the forward lamp harness. In order to service the ambient outside air temperature sensor, perform the following steps:
- Disconnect the electrical connector (3) from the outside ambient air temperature sensor through the fascia opening.
- Remove the push in retainer (2).
- Remove the outside ambient air temperature sensor (1) from the vehicle.