LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ambient Air Temperature Gage Sensor Connector
    GM1499766Courtesy of GENERAL MOTORS CORP.
  1. Install the outside ambient air temperature sensor (1) to the vehicle through the fascia opening.
  2. Install the outside ambient air temperature sensor (1) to the radiator support with the push in retainer (2).
  3. Connect the electrical connector (3) to the outside ambient air temperature sensor (1).
scientia non olet · About LEMON Manuals