LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Instrument Panel System Displays, Gauges And Console) >> Diagnostic Information and Procedures >> Scan Tool Output Controls

Scan Tool Output Controls

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selections Description
DIC All Segments Test DIC Segments All driver information center (DIC) segments illuminate until commanded OFF.
Display Test IPC Indicators The instrument panel cluster (IPC) illuminates the indicators when commanded ON.
Coolant Gage Sweep Test IPC Gages The IPC commands this gage to sweep to its maximum when you select UP. Then the gage is commanded to sweep to its minimum when you select DOWN.
Fuel Gage Sweep Test IPC Gages The IPC commands this gage to sweep to its maximum when you select UP. Then the gage is commanded to sweep to its minimum when you select DOWN.
Speed Gage Sweep Test IPC Gages The IPC commands this gage to sweep to its maximum when you select UP. Then the gage is commanded to sweep to its minimum when you select DOWN.
Tachometer Gage Sweep IPC Gages The IPC commands this gage to sweep to its maximum when you select UP. Then the gage is commanded to sweep to its minimum when you select DOWN.
scientia non olet · About LEMON Manuals