Diagnostic Starting Point - Instrument Panel, Gages and Console
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Begin the Instrument Panel (I/P) System diagnosis with Diagnostic System Check - Vehicle in Vehicle DTC Information. The Diagnostic System Check will provide the following information:
- The identification of the control modules which command the system
- The ability of the control modules to communicate through the serial data circuit
- The identification of any stored DTCs and their status
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.