Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Insert the shift lever (1) into the shift lever housing.

Fig 1: View Of Shift Lever

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the shift lever retaining screw (3).
Tighten: Tighten the screw to 7 N.m (62 lb in).
Position the shift lever boot (2).