LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Door System, Mirror System & Window System) >> Repair Instructions >> Weatherstrip Replacement - Front Door Opening >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door opening sill plates. Refer to Door Sill Plate Replacement (Door) or Door Sill Plate Replacement (Sliding Door) .
    2. Fig 1: View Of Front Door Opening Weatherstrip
    GM319728Courtesy of GENERAL MOTORS CORP.
  2. Pull the front door opening weatherstrip from the front door pinch-weld flange.
  3. Clean all adhesive from the pinch-weld flange.
scientia non olet · About LEMON Manuals