LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Front Door Window Belt Outer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the front door window.
  2. Remove the outside rearview mirror. Refer to Mirror Replacement - Power .
    3. Fig 1: Identifying Front Door Window Belt Sealing Strip
    GM1502935Courtesy of GENERAL MOTORS CORP.
  3. Remove the inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
  4. Use a flat-bladed tool in order to pry up at the front of the outer belt sealing strip from the inside edge.
  5. Remove the front door outer belt window sealing strip from the pinch-weld flange.
scientia non olet · About LEMON Manuals