LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Door System, Mirror System & Window System) >> Repair Instructions >> Roller Bracket Replacement - Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the sliding door garnish molding. Refer to Garnish Molding Replacement - Sliding Door .
  2. Remove the headliner trim finish molding. Refer to Headlining Trim Finish Molding Replacement in Interior Trim.
  3. Support the sliding door.
    4. Fig 1: Identifying Upper Roller Bracket
    GM1480571Courtesy of GENERAL MOTORS CORP.
  4. Mark the location of the sliding door upper roller bracket (1) to the door (2) with a grease pencil.
  5. Remove the sliding door upper roller bracket bolts.
    6. Fig 2: View Of Sliding Door Upper Roller Bracket
    GM319976Courtesy of GENERAL MOTORS CORP.
  6. Remove the sliding door upper roller bracket from the front edge of the upper track.
scientia non olet · About LEMON Manuals