Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the courtesy lamp lens.
Remove the overhead console screw.

Fig 1: View Of Overhead Console Mounting

Courtesy of GENERAL MOTORS CORP.

Grasp the overhead console and pull downward in order to disengage the fasteners.
Disconnect the electrical connectors from the overhead console.

Fig 2: Identifying Overhead Console Components

Courtesy of GENERAL MOTORS CORP.

Remove the power sliding door on/off multifunction switch (5) by using pliers in order to compress the retainers while pulling the switch away from the housing.