Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front door module. Refer to Door Module Replacement - Front .
- Release the inside door handle from the door module. Refer to Door Handle Replacement - Front Inside .
- Release the lock rods from the retainer clips.
- Release the door lock/latch bracket retainer tab from the module.
- Pull the lock rearward in order to release the lock bracket from the module.
- Disconnect the front door inside lock handle rods from the front door lock.