LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Door System, Mirror System & Window System) >> Repair Instructions >> Lock Actuator Replacement - Sliding Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the sliding door lock. Refer to Lock Replacement - Sliding Door Rear .
  2. Disconnect the electrical connector from the sliding door lock actuator.
  3. Fig 1: Locating Sliding Door Lock Actuator Rivets
    GM320033Courtesy of GENERAL MOTORS CORP.
  4. Drill out the sliding door lock actuator rivets.
  5. Remove the sliding door lock actuator from the sliding door lock assembly.