Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .

Fig 1: View Of Front Door Inside Handle Lock Module

Courtesy of GENERAL MOTORS CORP.

Using a small flat-bladed tool, remove the front door inside handle from the lock module.

Fig 2: View Of Door Inside Handle Assembly

Courtesy of GENERAL MOTORS CORP.

Pull back on the door inside handle assembly.

Fig 3: View of Front Door Inside Handle Rods

Courtesy of GENERAL MOTORS CORP.

Separate the upper and lower portions from each other. Slide the upper and lower portions off the lock rods.