LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Door System, Mirror System & Window System) >> Repair Instructions >> Contact Plate Replacement - Sliding Door Jamb >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the powersliding door.
    2. Fig 1: View Of Sliding Door Jamb Contact Plate
    GM320138Courtesy of GENERAL MOTORS CORP.
  2. Using the J 38778  , remove the sliding door jamb contact plate push-in retainers.
  3. Remove the sliding door jamb contact plate from the pillar.
  4. Disconnect the sliding door jamb contact plate electrical connector.
scientia non olet · About LEMON Manuals