LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Wiring Systems - Testing, Diagnosis & Repair) >> Diagnostic Information and Procedures >> Delphi Connectors (Push To Seat) >> Reinstalling Terminal

Reinstalling Terminal

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. In order to reuse a terminal or lead assembly, refer to Wiring Repairs .
  2. Ensure that the cable seal is kept on the terminal side of the splice.
  3. Insert the lead from the back until it catches.
  4. Install the TPA, CPA, and/or the secondary locks.
scientia non olet · About LEMON Manuals