LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions - 3 Of 5)) >> Off-Vehicle Repair Instructions (Part 2) >> Camshaft Timing Drive Components Cleaning and Inspection >> Visual Inspection >> Camshaft Position Actuator Oil Control Valves

Camshaft Position Actuator Oil Control Valves

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Camshaft Position Actuator Oil Control Valves Inspection Areas
    GM1326149Courtesy of GENERAL MOTORS CORP.
  1. Inspect the camshaft position actuator oil control valves for the following:
    • Blockage to the oil passage (1)
    • Missing or damaged oil screen clip (2)
    • Blockage or damage to the oil screen (3)
    • Damage to the sealing surface for the camshaft position actuator oil control valve solenoid oil seal (4)
    • Damage to the bracket (5)
    • Damage to the wiring harness connection and/or terminals (6)
  2. Replace a damaged camshaft position actuator oil control valve.
scientia non olet · About LEMON Manuals