LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Blower Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right side instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
    2. Fig 1: Disconnecting/Connecting Blower Control Module Electrical Connector
    GM1262636Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the blower control module.
  3. Remove the 2 heat stakes from the blower control module using a small chisel.
  4. Remove the blower control module.
scientia non olet · About LEMON Manuals