LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Mechanical - 3.6L (Ly7) - Introduction, Diagnosis & Troubleshooting) >> Diagnostic Information and Procedures >> Cylinder Leakage Test >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: A leakage test may be performed in order to measure cylinder/combustion chamber leakage. High cylinder leakage may indicate one or more of the following:
  • Worn or burnt valves
  • Broken valve springs
  • Stuck valve lifters
  • Incorrect valve lash/adjustment
  • Damaged piston
  • Worn piston rings
  • Worn or scored cylinder bore
  • Damaged cylinder head gasket
  • Cracked or damaged cylinder head
  • Cracked or damaged engine block